Heating and Air Conditioning -Ringgold, Dalton GA
(706) 764-7185
Mon-Sat: 24 Hour Emergency Service
Our Areas: Fort Oglethorpe, Calhoun, Chattanooga

What Is A Ductless Mini-Split System

As a homeowner, you need to find the best heating and cooling system for your home to make it more comfortable. You may be wondering, “what is a ductless mini-split system?” It’s one of the most popular HVAC system types on the market today, but many homeowners have yet to leverage the benefits it offers.

If you’re in the market for a new HVAC system, keep reading. You’ll get more insight into the incredible ductless mini-split systems. And then you can make an informed choice. This guide explores this type of heating and cooling system.

What is a Ductless Mini-Split System? Overview

Each mini split features two main components: an outdoor compressor/condenser, and an indoor air-handling unit. To connect the two main sections, there is a conduit containing a power cable, refrigerant tubing, suction tubing, and condensation drainage.

How It Works

To cool your home, the unit in each room blows your home’s warm air over cold evaporator coils. The coils contain refrigerant, which draws heat from the air. Then, the outside unit expels the heat into the surrounding air. It is a simple and effective way of cooling and heating your home.

These systems work perfectly in a situation where a window AC unit or baseboard heater can work. But the mini-split has an advantage: it requires minimal drilling in the wall.

You can have multiple indoor air-handling units connected to the outdoor unit to heat and cool the entire house. These systems not only work well for new homes, but are perfect for retrofits and remodels.

Pros of Ductless Mini-Split Systems

  1. Easy installation compared to traditional HVAC systems with minimal drilling
  2. Multi-purpose function of cooling and heating
  3. Built-in zoning allowing you to control the temperature of each room in your home
  4. Energy efficiency due to zero leakage through ductwork, unlike central HVAC systems
  5. Ideal for home remodels due to easy installation
  6. Remote control and customization options
  7. Longer lifespan in general
  8. Cost savings and other financial benefits, including tax credits, rebates, and other incentives for heat pump upgrades

Cons of Ductless Mini-Split Systems

Ductless mini-split systems carry higher upfront cost than ducted HVAC systems. In addition, you need professional installation services. They can also affect the aesthetic appeal of your indoor space, since you have units in every room. However, you have the option to upgrade the units to the version that is recessed in the ceiling.


Go ahead – redefine your living space with a ductless mini-split system. Call a professional HVAC professional from Neal’s Heating and Air at (706) 764-7185 or contact us online today. We’ll help you make your home more comfortable.


Keep Carbon Monoxide From Harming Your Family

How can you keep carbon monoxide from harming your family? It’s a question you need to answer.

When health professionals talk about carbon monoxide (CO), they often refer to it as “the silent killer.” People go to sleep at night, and never realize that a deadly gas is in the air. However, even small doses of CO can cause sickness. For many people, CO-related symptoms are mistaken for other kinds of sickness because they’re so similar.

Because this toxic gas is odorless, tasteless, colorless, and non-irritating, you need to be intentional about detection.

At this point, most homeowners would be tempted to just get a CO monitor, install it, and pat themselves on the back for a job well done. Don’t make that mistake. You do need one. But you should also take additional steps to safeguard your health.


How to Keep Carbon Monoxide From Harming Your Family

Keep reading. We’re going to discuss 3 steps you can take to keep carbon monoxide from harming your family.


1. Get a High-Sensitivity CO Detector

Carbon monoxide is fast-acting even at low levels. In fact, your heart, lungs, and brain experience permanent harm when you’re exposed to low amounts of CO over an extended time.

However, that’s not the worst part. What many people don’t know is that residential CO monitors wait to sound the alarm until CO has already reached unsafe levels. At that point, who knows how long CO levels have been elevated? Your health may already have been harmed. In story after story of people who survived carbon monoxide poisoning, they were exposed for a long period to “non-deadly” amounts. And some experienced lasting effects.

We’re not writing all this as a scare tactic. If you burn fossil fuels in your home or have an attached garage, CO poisoning is a real health risk.

Here’s a helpful chart of when to expect an off-the-shelf CO alarm to sound:

  • 40 PPM – alarm goes off after 10 hours
  • 50 PPM – alarm goes off after 8 hours
  • 70 PPM – alarm goes off after 1-4 hours
  • 150 PPM – alarm goes off after 10-50 minutes
  • 400 PPM – alarm goes off after 4-15 minutes

But what if you have long-term exposure at 35 PPM? Your alarm may never sound. And you’ll have to deal with possible symptoms like headache, difficulty thinking, cardiovascular trouble, and others. Over a long period of time, your attention span may shrink, and your health may be permanently compromised.

Install highly-sensitive carbon monoxide monitors. They sound an alarm at levels as low as 12 PPM.

Put them near sleeping areas, in the kitchen, near fireplaces, and in your utility room. They should be located near the ceiling because CO is lighter than air.


2. Get a Professional Installer

Sometimes gas appliances break – and need replacement. When the installers are putting your shiny new appliance in, don’t just trust them! Before they touch a thing, ask to look at their permit. And be prepared to deny installation if they’re not properly certified. Your safety depends on proper combustion and venting.


3. Get Professional Appliance Testing

Efficient gas appliances keep carbon monoxide out of your air. But how do you know if they’re efficient? You have a technician test them with a combustion analyzer.

A good combustion analyzer tests your gas appliance’s performance in these 3 areas:

  1. Efficiency
  2. Ventilation
  3. Fuel-air mixture

Your heat pump or furnace, water heater, fireplace, stove, and any other gas-fueled appliance should all be tested a minimum of once per year, but ideally twice – right before the temperature change in spring and fall. In addition, have your wood-burning fireplace tested at the same time.

Don’t simply trust that your gas appliances are safe. Find out for sure.




Interested in protecting your family with a professional-grade CO detector?

We’ll be glad to install one for you! Give Neal’s a call today at (706) 764-7185 or fill out our contact form for more information.


What Size Heating and Air System Do I Need?

When you ask, “what size heating and air system do I need,” you’re asking an important question. And, when replacing an old system, the answer matters. Your choice will make a difference in your quality of life.

We’re here to inform your decision. In this article, we’ll look at 4 key factors that affect what size heating and air system you need for your home.


What Size Heating and Air System Do I Need? 4 Key Factors

Keep reading! You’ll learn about the factors that determine what size heating and air system your home needs. One thing is certain – your home isn’t just like anyone else’s (spoiler: that’s factor #2).


1. The SEER Rating Reveals More Than Savings

Energy-efficiency: the Holy Grail of home improvement. You can get energy-efficient windows, appliances, and electronics. In fact, you can even get an energy-efficient massage chair. Likewise, the same goes for your heating and air system. And the Seasonal Energy Efficiency Ratio (SEER) indicates just how energy-efficient a home comfort system is. Here’s how:

Systems are rated according to tons of capacity. 1 ton of heating or cooling per hour comes out to 12,000 BTUs (British thermal units).

For a 2-ton unit, it’s simple multiplication. 12,000 x 2 = 24,000 BTUs.

However, 2 systems that are each 2 tons aren’t necessarily the same efficiency. This is where the SEER rating comes in. For the best efficiency, get the unit with the highest SEER rating your budget has room for. Higher ratings equal greater energy savings.

As an example, say you’re considering 2 units. One is 14 SEER, and the other is 16 SEER. The 16 SEER system is more efficient than the other. In the real world, that should add up to a lower utility bill during peak seasons.

However, the energy savings alone don’t usually justify the price tag. Most times, homeowners’ long-term savings roughly equal the system’s extra cost.* Why do we recommend higher SEER units, then?

Because of the comfort.

That 16 SEER unit likely has multi-stage technology. In layman’s terms, it runs longer at lower speeds. It’s efficient and delivers comfortable air consistently to all areas of your home. And it takes much less energy to do it than the 14 SEER unit did.

Tip: Make sure to look for an Energy Star-qualified heating and air system. You’ll see a SEER ranging from 15 to 23.


2. Your Home Is Unique

Its physical spaces, walls, and even directional positioning each play a part. All these factors help answer the question, “What size heating and air system do I need?”

  • Living space cubic air volume
  • Surface area of exterior walls that have prolonged, direct sun exposure
  • Number of windows and what condition they’re in
  • The build quality of your home
  • The age of your home
  • The quality of your home’s wall and attic insulation
  • How leak-free your home’s existing vents and ductwork are
  • Whether your ductwork is properly-sized or not
  • How much shade your home receives

Evidently, square footage doesn’t tell the whole story. You can’t just calculate that and choose a properly-sized heating and air system.

Tip: Ask a professional HVAC technician, “What size heating and air system do I need?” He should be able to calculate these factors.


3. Wrong-sized Systems Cost More

What happens when your air conditioner turns on? It cools your home to a certain temperature, then shuts off again. However, if the system is too big for your home, it won’t stay on long enough. It’ll cool super quickly, then turn off. While that sounds like a good thing, it’s not.

When you cool the air too quickly, your walls, floor, and furniture don’t have time to get cool as well. They can keep giving off heat into the air, making the system turn on again – sooner than it should. This could continue all day.

That leads to inefficiency and wear and tear. Your power bill may be unaffected. However, every time the system turns on and off, it wears out a bit more. Repairs – and even replacement – may come sooner than they would if the system was the right size to start with.

However, if your system is too small, it may run longer, waste energy, and wear out a bit sooner from constant use.

Tip: Put insulation on your list of fixes – if your home isn’t well insulated, even a right-sized unit may perform inefficiently and experience more wear and tear.


4. Experience Makes a Difference

Much of your utility bill comes from heating and air costs. Because of that, only work with an experienced, professional, licensed HVAC tech.

You need to be able to trust them. Trust them to stick with ACCA-approved techniques as they figure out what the best heating and cooling unit for your home is. Trust them to only sell you what you need.

Once finished, your cooling system should be energy–efficient. And, above all, it should meet your family’s comfort needs.

Tip: You can rely on Neal’s Heating and Air. We’ll make absolutely sure that the unit we’re recommending is the right one. And once you decide, our reliable, licensed staff will install it the way it should be. Call us at (706) 764-7185 or contact us online today!



*If the home is well-insulated, the ductwork is leak-free and sized correctly, and the system is correctly sized for the home.


How to Fight the Flu With Your Heating System

Flu season is one of the worst times of the year. No one likes colds, but at least you can function. But the flu is a different animal. It’s miserable. And so are you, when you get it. However, you can actually fight the flu with your heating system. It’s true! You can prep your heating system to help keep you healthy.

But how can simple heating help? It’s all about indoor air quality. When you allow mold, dust, and bacteria to flourish, your flu can feel worse and take longer to run its course. The better your air is indoors, the less contagion will spread. And, the faster you’ll be able to recover.

Keep reading to find out how to fight the flu with your heating system.


How to Fight the Flu With Your Heating System: 3 Strategic Steps

After the first step, the rest are in no particular order. Some are upgrades that you may need help with, and some are easy tasks. They can all make a difference.


1. Replace Your Air Filters Monthly

Mark your calendar for this one. Dirty air filters equal dirty air in your lungs.

But do you really need to change it? Won’t vacuuming do the trick? Nope. A clean, new filter is essential. Your filter isn’t just expensive floor origami. It’s a barrier that keeps contaminants out of your indoor air. And, swapping out your air filters every month can make your heating and cooling system last much longer.

But there’s more. If you keep an old, dirty air filter in the vent, it starts to let all those germs and contaminants back into your air – and all around your home. That’s the last thing you want if you’re trying to keep the flu at bay.

To Do: buy an air filter with a high MERV rating. Viruses and bacteria have a harder time spreading when trapped in one of these excellent filters. Give us a call for info about what filter is best for your HVAC system.


2. Raise Your Air Humidity

If you feel like your air is dry, it probably is. You may have cracked skin, bleeding nose, all those lovely cold weather symptoms. But higher humidity isn’t just good for your skin. It also makes for a less hospitable environment for germs and viruses. They thrive in low humidity. But watch out! Crank it too high, and mold will make itself at home.

Any heating system in good condition will help regulate humidity. All you need to do is put it into the air.

To Do: install a system-wide humidifier or use cool air humidifiers to avoid burns and the too-damp feel of hot, humid air.


3. Get a Good Air Purifier

Know how to fight the flu with your heating system? Install a system-based air purifier. Your filter carries some weight – but your air purifier is an Olympic powerlifter. With both, your indoor air quality will be amazing.

Remember – you’re not looking for a room air purifier. If you get one of those, you’ll have a bubble of clean air, while the rest of the house is neglected.

However, a system-based air purifier knocks contaminants out of your whole home’s air fast. In fact, all your air cycles fresh an average of once every 11.5 minutes. Don’t give airborne bacteria, mold, and pollen a chance to worsen your flu symptoms.

To Do: choose a photocatalytic oxidation air purifier. You probably won’t need to replace filters, and this type of purifier works wonders.




To make your heating system help fight the flu, Neal’s Heating and Air can help. Our licensed, professional techs in North Georgia can come out to install an air purifier or humidifier to keep your air healthy. Just call us at (706) 764-7185 or request a free consultation today!

Your Heater Is Blowing Cold Air: 4 Questions You Should Ask

If your heater is blowing cold air, you’re probably not a happy homeowner. After all, the comfort of your home should be consistent. And, you rely on your heater to keep you warm all winter. Having to wear a blanket or warm layers indoors isn’t your idea of comfort. What to do? 

This is where experience and knowledge can help. Even in North Georgia heat pump service is super important. Because comfort systems have a range of normal operation, you need to know what’s normal – and what should lead you to call for repairs. At Neal’s Heating and Air, we want to help. So, here are 4 questions you should ask if your heater is blowing cold air. 


4 Questions to Ask If Your Heater Is Blowing Cold Air 

Hold the phone! These questions are essential to ask before you get a heating service company to check your system. Once you know the answers, you’ll know if you need a tech. 


1. Is Your Heat Pump Defrosting Like Normal?

If your heat pump is doing what it should, it’ll run on a schedule. Once per hour or so, it should activate to melt ice off the unit. While it’s warming up, you will feel cold air through your vents. This is normal during defrosting. After the defrosting cycle ends, you’ll feel warm air again.

Call for heating system service if the heater keeps pushing cold air out. Make sure to ask for a licensed and insured tech. We’ll be able to diagnose the problem quickly and bring back your comfort.


2. Is Your Outside Heater Unit Frozen?

If your heat pump is frozen, it could look and sound like it’s operating normally – while failing to warm your home. If your heater is blowing cold air, make sure your heat pump isn’t frozen. When the temperature drops below 20° F, ice may form on top of your heat pump. Remove it, then wait a bit. If your heater starts putting out warm air again, you’re good to go.

Give Neal’s a call if nothing changes once the ice is removed. We’ll come out to restore heat to your home. No need to live in Antarctica!


3. Is It Really Warm Air?

What temperature is your thermostat set at? Somewhere between 65 and 80, right? Well, your normal temperature is around 98° F. Heated air will always feel cool when it’s blowing on you. The best gauge of whether your heater is blowing cold air is your thermostat. Check it first – then call for service if the indoor temperature is more than a few degrees colder than the setting.


4. Could the Compressor Be at Fault?

Let’s say your heater is blowing cold air. And, it isn’t defrosting, frozen, or blowing warm air. If that’s the case, your compressor may be broken. To make it simple, your heater never really heats air in the winter. Rather than making air hotter, it draws heat from air outside your home and forces it through your ductwork to heat your home. That’s why heat pumps are less effective when it gets extremely cold outside.

Heat is removed from air by refrigerant. To keep the refrigerant moving and more effective, the compressor circulates it. And the compressor circulates the refrigerant. It’s a crucial part. And, if it breaks, your heat pump is immediately useless. Call a heating and air specialist if your heat pump stops operating. If you hear it making screeching sounds, that’s a clue that your compressor is breaking but not quite broken yet.




If your North Georgia heater is blowing cold air and you want your home to be warm, call Neal’s Heating and Air at (706) 764-7185 or fill out our contact form today. We’ll fix your heat pump and restore comfort to your home.


How to Keep Pests Out of Your Heating and Air System 

Do you know how to keep pests out of your heating and air system? Your home’s comfort may depend on it. And, it doesn’t matter what season it is. Summer, winter, spring or fall – pests can invade your heating and air system year-round. Now, this doesn’t necessarily mean they’ll make their way indoors. However, they can cause damage and disrupt your system’s normal function. So, now’s the time to make certain to keep them out!


How to Keep Pests Out of Your Heating and Air System


Keep reading to learn more about how to keep pests out of your heating and air system. We’ll break it down into 5 simple steps.


1. Clear the Area Around Your System

Your heating and air unit attracts pests for a couple of reasons: shelter and food. Of the two, shelter is far more common. But you’d be surprised how many homeowners keep their trash cans near the HVAC unit. Simply make sure to:

  • Keep your trash cans away from the unit to avoid the allure of food
  • Clear weeds, bushes, and tall grass away from your system to eliminate shelter


2. Seal Your Ducts

Cracks or loose joints can be an invitation for pests to make their way into your ductwork. From there, they have easy access to the whole system. Seal leaky ducts. By doing so, you’ll keep pests (and allergens) out.


3. Secure Your Vents

The warm air coming from vents like your dryer vent and exhaust fans can attract pests. It’s not uncommon to find different kinds of nests built in vents. From there, they can make their way into your home. Install strong, secure vent covers to stop the problem before it starts.


4. Invest in Pest Control

You know one of the best ways to keep pests out of your heating and air system? Invest in pest control. At the first sign of trouble, call a pest control expert. You may cut short an infestation. And, they won’t be attracted to your heating and air system if they’re repelled from your property in general.


5. Maintain Your System Regularly

This is the most often-overlooked aspect of keeping pests out of your system. If your maintenance technician notices a pest problem, you’ll be aware. And you’ll probably be able to take care of the problem before it becomes expensive. Schedule regular maintenance and cleaning.  If your heating and air unit is clean and whole, it will discourage pests from trying to get in.




Pests are a nuisance in all kinds of ways. And, they can wreak havoc if left to themselves. Take steps to keep pests out of your heating and air system before they damage it. If you do end up with a problem, be sure to give Neal’s Heating and Air a call at (706) 764-7185 right away. We’ll help you set your system right again.


Prepare These 3 Areas of Your Home For Winter

Changing leaves, college sports, warm fires, and delicious food add up perfectly to make the fall season an enjoyable time of year. But winter next up on the horizon! That means it’s important for us to prepare our homes for the dropping temperatures. In order to stay warm and combat energy costs, make sure to prepare these 3 areas of your home for winter.


Prepare These 3 Areas of Your Home For Winter

Check the following 3 areas of your home to ensure you’re prepared for the coming winter.


1. Doors, Windows, Fireplace, Gutters.

Seal any leaks in your home. It’s an important first step to keep cold air outside and warm air inside. Installing caulk around leaky windows, or weather stripping around doorways is inexpensive, and it makes a big impact on your energy bill.

When you’re not using your fireplace, the flue should close well enough to prevent airflow. However, if it can’t, consider investing in a flue sealer.

Cleaning your gutters prevents water from building up in them, freezing, and then making its way under the roof and down the walls of your home.


2. Heating And Ventilation System.

Prepare your heating system to handle the increased workload. In other words, clean the filter, seal any duct leaks, and make any needed repairs or adjustments. A trusted HVAC technician from Neal’s can inspect, clean, and repair your system to ensure that it’s prepared well to run at peak efficiency.

By joining Neal’s Comfort Club, you’ll earn even more savings on services and labor while you enjoy your properly working heating system.


3. Plumbing

When pipes freeze, they burst, and the damage is costly to fix. Thoroughly insulate any pipes that are vulnerable to freezing. Pay close attention to pipes in the basement, attic, or that lead outdoors. Even when you’re away from home, it’s worth it to keep your home warm enough to prevent pipes from bursting.

To help your heating system run more efficiently this winter, and to figure out how you can maximize your energy and cost savings, call Neal’s Heating and Air at (706) 764-7185 or schedule your free inspection online today. We’ll be happy to help you prepare your home for winter.


6 Main Reasons for Replacing Your HVAC Unit

It’s important to maintain and repair the HVAC unit in your home to keep it going. But eventually, it’ll need to be replaced, even with the proper care and attention. Although replacing your HVAC unit is expensive, it can save you from pouring money into a unit that should really be replaced. Let’s go over some of the signs that tell you it’s time to replace your HVAC unit.

The 6 Main Reasons to Replace Your HVAC Unit

Here are 6 of the most common reasons why you might have to replace your HVAC system.


1. Age

Regular maintenance will extend the lifespan of your current unit. But, eventually, maintenance won’t be enough to keep your unit working as efficiently as it should be. If your system is between 10 and 15 years old, its poor performance is likely due to its age. This will cost you in rising energy bills and more frequent repair visits. A certified HVAC technician from Neal’s Heating and Air will help you determine if replacing your HVAC system would be more cost effective than making more adjustments on the old one.


2. Inefficiency

As the world of technology advances, it helps make HVAC systems even more energy-efficient. That means your HVAC system could be outdated even if you think it still works well. To lower your energy bills, a skilled HVAC inspector might suggest that you replace your HVAC unit. You could save up to 30% more energy just by updating to a newer and more energy-efficient unit.


Another common cause of HVAC inefficiency is low quality or leaky ductwork. Neal’s Heating and Air always makes sure to check ductwork when they conduct free HVAC inspections. With ductwork that works, you could save another 30% of energy from escaping from your system.


3. R-22 Freon Leak

There’s a closed circuit in many HVAC units that cycles R-22 Freon through the system. So, if you find that your unit needs a refill of Freon, that means it has a leak and needs a repair. However, Freon is getting more expensive, so that repair will cost you more than it used to. Add the high price of the Freon refill to the price of the repair, and you may find that it’s more cost-effective to replace your HVAC unit for a newer, more energy-efficient model.


It can be tempting to try to refill the Freon by yourself without fixing the real issue. But, without a proper system repair or replacement, you’ll just have to do the same thing again and again. You will find major savings by either repairing the leak or replacing the unit.


However, HVAC units that use R-22 Freon aren’t made anymore. And, by 2020, HVAC manufacturers won’t be producing R-22 Freon either. If you find that you’re having problems with your R-22 Freon unit, now would be a great time for you to replace your HVAC system.


4. Changes to Your Home

HVAC units are installed in homes based on the size of the cooling load of that home. The cooling load is the amount of energy needed to cool your home. If your home has been updated or adjusted to be more energy-efficient, then it shouldn’t take as much energy to cool it. This can have negative effects on the HVAC system that was installed to cool a less energy-efficient environment. Since the system is now too powerful for the home, it will continue to experience unnecessary wear and tear, which may be a sign that it’s time to replace your HVAC unit.


5. Lower Air Quality

Your HVAC system does more than heat and air condition your home. It is responsible for most of the air circulation in your home. That’s why it’s important to pay attention to the quality of the air it circulates. If there’s too much humidity in the air, that may be a sign that your HVAC unit isn’t quite doing its job. If it’s circulating low-quality air, that can be worse than not circulating any air at all.

Low-quality air does more harm than good. It has been connected to asthma and other respiratory issues and can contribute to allergies. If low air quality in your home has been causing any issues for you or a loved one, an HVAC unit replacement could help a great deal.


6. Broken HVAC Unit

If your HVAC unit is constantly breaking down, or you’re having few but much bigger issues with it, it may be telling you to save time and money by replacing your broken HVAC unit.


If you have questions about a replacement HVAC system or need a free HVAC inspection, call Neal’s Heating and Air right away at (706) 764-7185.

How a Smart Thermostat Saves You Money

Here in Southeast Tennessee, we have a very unpredictable climate. It’s common for the weather to change very quickly. There can be wide ranges of temperatures from day to day. And even from hour to hour on some days, no matter which season we’re in. This can make regulating the temperature in your home quite a chore. And constantly having to reach for the thermostat can be a headache. But did you know that it can hurt your wallet as well? Thankfully, there’s a simple solution. Smart thermostats bring convenience and savings into your home – and help you combat waste as a bonus.

How Does a Smart Thermostat Save You Money?

Check out these 3 main ways that a smart thermostat saves you money by helping you control the temperature of your home.

1. Accessing It From Anywhere

Using your smart device, you can control your smart thermostat from wherever you can get a signal. Easily adjust your home’s heating and cooling when you’re on the go. Simply open the thermostat app on your phone, and the temperature control is at your fingertips. This is an especially helpful feature to use if you forgot to adjust the thermostat before you left home, or if you’ve had a change of plans.


2. Reducing Wasted Energy

It’s hard to avoid wasting energy in your home, no matter how much you try. But small adjustments in how you handle your heating and cooling can make a big difference. We tend to reach for the thermostat when the outside temperature suddenly gets warmer or colder. And then we reach for it again the next time the weather changes. While this may seem reasonable to us, it actually makes the heating and air conditioning system work overtime to keep up.


Smart thermostats are easy to program so that you don’t fall into a costly heating and cooling cycle. Whether you need the heat to turn on just before you get home, or for it to turn off when you head to bed. Your smart thermostat will follow whatever schedule you set on the app.


3. Getting Clear Reports

Besides just following a schedule to heat and cool your home, smart thermostats can send detailed energy reports. These reports range from how much energy you have used over a period of time, to how you can optimize your heating and cooling system. This helps eliminate a lot of guesswork and trial and error, leaving you with easy savings.


Make the Switch to Smart

A smart thermostat saves you money. It gives you better access and greater efficiency, all while keeping you comfortable. As soon as you’re ready to switch to a smart thermostat, call Neal’s Heating & Air at (706) 764-7185. We’ll help you figure out which smart thermostat is best for your home.

Keep Your Air Conditioner from Freezing This Summer

It’s happened to all of us, mid-summer heat in Georgia can be unbearable so you crank up the AC and the next thing you know, it’s stopped working. When you take a look, the unit is frozen.  Then it’s time to call the professionals for air conditioning repairs in Ringgold, GA in mid-july.

Waiting for the unit to thaw out while you sweat is never fun.  So, why does it freeze and what can you do to stop it?

air conditioning repairs in Ringgold, GA

Possible Cause 1 – Air Flow

There may be restricted air-flow in your home. When there’s no air moving through the air conditioning system, there is nothing to keep the condensation on the coil from freezing.  The culprit is usually dirty filters.

What to do: If you think air flow is the culprit and you don’t yet want to start calling all of the heating and air conditioning companies in Ringgold, GA, the first thing to do is switch off your unit to start the defrosting. Turn on the fan. Let it run for 60 to 90 minutes. Change your air filter during this time and check for any blocked vents. After it’s finished defrosting, turn your air conditioner back on and it should start working again.

Prevention: Check your filters monthly and change them when they appear dirty. In the summer, when your unit is working hard, go ahead and change them monthly no matter what.  Ensure no air vents are blocked with furniture.

Possible Cause 2 – Freon

Your HVAC system may be low on Freon which is used as a refrigerant. This is usually a sign of a leak, which is bad. Your home’s cooling system should never leak, it’s a sealed system.

What to do: When you have a leak, it’s time to call heating and air conditioning companies in Ringgold, GA.  You will either have to repair or replace your unit, depending on its age and condition.

Prevention:  Inspect your HVAC unit regularly, if you ever see signs of a leak, call Neal’s Heating and Air for air conditioning repairs in Ringgold, GA immediately.

Possible Cause 3 – Mechanical Problems

It is possible mechanical problems with your unit or a kinked line or clogged filter drier could be the cause of your freezing unit.

What to do: If any of these are responsible you will need to immediately call for help, as a HVAC technician will be necessary for these air conditioning repairs in Ringgold, GA.

Prevention: Schedule twice a year maintenance to make sure your unit is in working order. All heating and air conditioning companies in the Ringgold, GA area such as Neal’s Heating and Air can work with you to schedule an appointment at your convenience.